Sma Solar Port Devices Driver

  
  1. Sma Solar Port Devices Driver
  2. Sma Solar Port Devices Driver Device

Problem

Cause and corrective measures

Obsolete or incorrect measured values are displayed.

Connection to VPN or Internet is disrupted.

  • Ensure that the network cable is connected correctly and that the network port Link LED is glowing.

or

  • Check the status of the connected devices in the device overview in Sunny Portal.

The energy meter is connected incorrectly.

  • Connect the energy meter correctly (see energy meter manual).

or

  • Swap the channels for purchased-electricity and feed-in meters in the meter configuration on the user interface.

or

  • In the meter configuration on the user interface select an inverse profile.

The display in your web browser is not updated.

  • Reload the page in your web browser.

Not all devices are being detected.

Not all devices are in operation.

  • Ensure that all devices are in operation.

There are too many devices in the system.

  • Ensure that no more than permissible devices are in the system.

The network configuration of the local network is incorrect.

  • Ensure that the network configuration is correct. SMA Solar Technology AG recommends automatic network configuration.

The Data Manager user interface cannot be called up.

The firmware has been updated to a newer version.

  • After a firmware update, errors may arise when restarting the products. Reset the product to the default settings. To do so, press and hold down the function button for 15 to 20 seconds. This will also reset all of the data in the product.

Modified parameters will not be adopted after a waiting time of approximately one minute.

Parameters are modified by two users at the same time.

  • Ensure that parameters cannot be modified at the same time on the user interface of the product and in Sunny Portal.

The Data Manager cannot be registered in Sunny Portal.

The Internet connection via a proxy server is not possible.

  • Contact your network administrator.

The PIC or RID entry is incorrect.

  • Verify your entry.

The firmware of a connected SMA product was not updated during a firmware update via USB flash drive.

The firmware version downloaded is not the latest or is not suitable for the SMA product.

  • The firmware version must be later than the firmware version installed on the SMA product. Ensure that you have downloaded the correct firmware version for your SMA product and update the firmware again.

The DC input voltage is not sufficient for a firmware update.

  • With older inverters, a firmware update is only possible above a certain DC input voltage. Depending on the time of day, the weather, and the condition of the PV modules (e.g. affected by pollution or covered with snow), the DC input voltage may be too low for a firmware update. Ensure that there is sufficient DC voltage present and update the firmware again.

The transmission quality in the local network is not sufficient.

  • Errors can occur during data transmission if the transmission quality in the local network is too low. Check the network status of your local network and, if necessary, contact your network administrator.

No data are displayed on the user interface of the Data Manager.

The buffer capacitor of the Data Manager's real-time clock might have discharged due to being without voltage supply for a longer time period.

  • Make sure that the Data Manager has access to a time server on the Internet or in the local network to obtain a current time.

Devices
Multimedia Business Messengers Desktop Development Education Games Graphics Home Networking Security Servers Utilities Web Dev Other
Sort by: Relevance

Switch on your PC, activate Bluetooth and start Sunny Explorer. That’s all that’s needed to give operators and installers an overview of their PV plant. The free software is the optimum addition to inverters with Bluetooth.

Sma Solar Port Devices Driver

Command line tool for accessing the Sunny Beam device from SMA under Linux. It only requires the libusb library. No additional drivers are needed. Reads power production of the solar panels through the Sunny Beam: - current production, - total production. This package contains a user mode Linux driver for the SMA SunnyBoy solar power inverter. Please see the readme for more information. Follow SMA SunnyBoy Inverter driver SMA SunnyBoy Inverter driver Web Site.

SMA Off-Grid Configurator

Each design aspect is carefully analyzed, from sizing the PV array, battery and inverter, to a final cost analysis, providing the user with comprehensive planning assistance. The Off-Grid Configurator supports SMA off-grid systems worldwide, including both 230 V and 120 V systems.

  • Publisher: SMA Solar Technology AG
  • Last updated: October 28th, 2011

BlueRS+ Configurator

For the Bluetooth serial adapters developers have developed an easy-to-use Windows-based configurator. Bluetooth is a proprietary open wireless technology standard for exchanging data over short distances (using short wavelength radio transmissions in the ISM band from 2400-2480 MHz) from fixed and mobile devices.

  • Publisher: Stollmann E+V GmbH
  • Last updated: November 28th, 2011

Citrix XenApp Fundamentals SMA

It is an easy-to-setup, wizard-driven, out-of-the-box remote access solution designed for small and medium-sized businesses. Using XenApp Fundamentals, businesses can provide their users secure access to business applications and documents from anywhere on any device.

Sma Solar Port Devices Driver
  • Publisher: Citrix Systems, Inc.
  • Home page:www.citrix.com
  • Last updated: September 11th, 2014

Easergy Configurator Series 12

Easergy Configurator is a MS DOS PC-based software which enables the configuration of all Easergy range equipment, using a serial cable to connect it. The Configurator automatically recognizes the type of Easergy equipment connected to the PC and proposes a choice of available language versions when starting.

  • Publisher: Schneider Electric Telecontrol
  • Home page:www.schneider-electric.com
  • Last updated: January 31st, 2016

SMA Connect Agent

The SMA Connect Agent is a new feature to use the Scheme URL to replace the Browser Plug-ins. The SMA Connect Agent is just like a bridge to receive the Scheme URL request and launch the specific native application. It has an easy, user friendly interface.

  • Publisher: Dell
  • Last updated: March 6th, 2017

InventoryBuilder

Even with the best home security in place, significant losses such as fire and theft can occur. Having an up-to-date home inventory will help you get your insurance claim settled faster and save you a lot of time and headaches. InventoryBuilder will also help you purchase the correct amount of insurance and not what your insurance agent think you should buy.

  • Publisher: InventoryBuilder
  • Last updated: April 21st, 2010

Stew Perry Contest Log

This program scores 1 point for each QSO plus 1 point for each 500 kilometers distance to the station being worked. The distance is based on the grid square. Four points are also credited if you work a QRP station; however, that is not added here since the points are only allowed if the QRP station submits his/her log.

  • Publisher: N3FJP Software
  • Last updated: February 28th, 2012

E-Mail Activator

The E-Mail Activator Service is a service, which scans an E-Mail account for activation requests and automatically performs the product activation.The E-Mail Activator - Configurator is a standalone application, which you can either run on the same system, where the Activation Server is located, or you can download the application to your PC.

  • Publisher: Mirage Systems GmbH
  • Last updated: November 25th, 2011

StecaGrid Configurator

StecaGrid Configurator makes it possible to plan a photovoltaic system in an even more professional manner.There are four different options for determining the size of a photovoltaic system after selecting a module type. In addition, modules stored in a large database can be filtered according to specific criteria.

  • Publisher: Stecasolar
  • Last updated: November 22nd, 2014

Virtual Serial Port Driver

Virtual Serial Port Driver by Eltima creates virtual COM port pairs in the system. Using these ports serial applications can communicate with each other and transfer data via virtual null-modem cable.

  • Publisher: Eltima Software
  • Home page:www.eltima.com
  • Last updated: February 27th, 2017

Serial Key Generator

Serial Key Generator is a program to help developers generate serial numbers for applications. You can generate serial keys using a custom number of columns and characters per column. The sequence of numbers/digits can be defined in the application. The output can be saved as CSV or TXT documents.

  • Publisher: VCL Examples
  • Home page:skgenerator.vclexamples.com
  • Last updated: September 3rd, 2014

Serial Port Monitor

Serial Port Monitor is a professional application for RS232/422/485 COM ports monitoring. It monitors, displays, logs and analyzes all serial port activity in a system.

  • Publisher: Eltima Software
  • Home page:www.eltima.com
  • Last updated: August 19th, 2020

World Community Grid - BOINC for Windows

World Community Grid - BOINC for Windows is an easy-to-install version of BOINC already configured for use with World Community Grid. World Community Grid is an institution that aims to create the world's largest public computing grid to tackle projects that benefit humanity. Anyone who wants to help this collective effort only has to download and install the application.

  • Publisher: World Community Grid
  • Home page:www.worldcommunitygrid.org
  • Last updated: September 30th, 2010

LI-24/Hart Configurator

LI-24/Hart Configurator program is used to change the configuration type temperature transducers Aplisens LI-24/Hart company.The program communicates with the transmitter using the HART protocol via RS232 serial port.With the help of the program can read, modify, and then enter all settings to the transmitter.

  • Publisher: Aplisens
  • Last updated: May 24th, 2011

SY Configurator

SY configurator is a free program specifically developed for valve manifold configurations using the SY solenoid valve range. The program can configure valve manifolds:- using SY valves of different sizes- for use with our EX250, EX260, EX600 Serial Interface Units

Driver
  • Publisher: SMC
  • Home page:www.smc.eu
  • Last updated: April 17th, 2014
Sma solar port devices driver updater

HW Virtual Serial Port

Sma Solar Port Devices Driver Device

Driver

HW Virtual Serial Port is a one-of-a-kind piece of software that allows you to emulate an unrestricted virtual serial port driver meant especially to be read and used by TCP/IP devices. This application is basically a driver that creates and adds a virtual serial port to the system.

  • Publisher: HW group
  • Home page:www.hw-group.com
  • Last updated: May 2nd, 2010

Advanced Serial Port Monitor

This program allows you to check the flow of data through a computer's COM ports. As you can see from software name this application can work as serial port monitor. It supports full duplex mode, flexible adjusting of parameters, output received data to file, automatic and manual modes.

  • Publisher: AGG Software
  • Home page:www.aggsoft.com
  • Last updated: May 26th, 2020

Quartus II Programmer

Quartus II Programmer is a program that enables you to add your programming and configuration files, specify programming options and hardware, and then proceed with the programming or configuration of the device. It automatically detects devices with shared JTA Programmer and prompts you to specify the correct device in the JTAG chain.

  • Publisher: Altera Corporation
  • Home page:www.altera.com
  • Last updated: September 1st, 2014