Segger Usb Devices Driver Download For Windows 8.1
The Windows download is an executable installer, named like JLinkWindowsV684.exe. Double click it to start the installation process; enter the administrative password; accept the license; accept the destination folder (C: Program Files (x86) SEGGER JLink) accept the default USB driver. Using emUSB-Device Video, an embedded device can transmit video data to a host, be it from a dedicated camera peripheral, from a storage medium or generated by the application. EmUSB-Device Video allows the device to handle video data irrespective of the available hardware, for example pre-recorded instruction videos can be played from a hardware without a camera. USB driver installer for FTDI and Libusb drivers. This tool simplifies installation of the USB drivers for Libusb and FTDI D2XX drivers for your devices. Simply select the device from the list, right-click, select the desired driver type and the tool will do the rest. ARM Segger USBDriver and click Next. When installed successfully, a confirmation screen is displayed. When installation issues arise, perform these steps: Open the Windows Device Manager (you may use devmgmt.msc in the command prompt). Expand Universal Serial Bus controllers. One devices should have the name J-Linkm driver.
Segger USB Devices Driver Download For Windows
Community MemberI am running Windows 7 Pro SP 1 64 bit and have gong through the tools installation procedure, in particular running nRFTools_7_7_0_Installer.exe. This ran the J-Link V5.02 installation. I selected both Install USB Driver for J-Link and Install USB Driver for J-Link with Virtual COM Port.
When it identified the 3rd-party applications using JLinkARM.dll I selected the Keil MDK V5.17 (DLL V5.02 in 'C:Leil_v5ARMSegger').
When I plug the nRF52 board into the USB port and turn it on it is recognized in the device manager under 'Other devices' as 'J-Link' but the device driver is not installed.
I have redone the installation several times, both as administrator and not. I have even uninstalled my Atmel tools that were also using J-Link and cleaned the registry of references to J-Link. None of these have changed the results.
How do I get this to work?