Saxa Card Reader Driver

  
  1. Saxa Card Reader Driver
Card

SOLUTION 1 - Verify if minimum system requirement is met.
SanDisk card readers support Windows Vista, Windows XP SP2 and Windows 2000 SP4, Windows 7.
NOTE: No additional drivers need to be downloaded for the card readers as they are native to the above mentioned supported operating systems.

For Mac users, see
Troubleshooting USB device on Mac


SOLUTION 2 - Verify the reader's status under Device Manager.
STEP 1 - Connect the reader to the PC

NOTE: It is recommended that you plug your card reader to the back USB port on your PC to ensure that there is enough power from the USB port for the card reader to be detected properly.
STEP 2 - Check under Device Manager
1. Right-click My Computer.
2. Select Manage.
3. On the left pane, click Device Manager.
NOTE: The card reader will appear in two places: Disk Drives and Universal Serial Bus controls as USB Mass Storage. If there is a yellow exclamation point (!) or question mark (?) next to the device, try to refresh the drivers.

STEP 3 - Refresh the drivers
1. Right-click the entry with the error mark, select Uninstall.
2. On the top menu, click Action, and then click Scan for hardware changes.
STEP 4 - Verify if the reader is detected
1. Double-click My Computer.
2. Look for the card reader under Devices with removable storage.
SOLUTION 3 - Try other USB ports.
A yellow exclamation point (!) under Device Manager usually means that the device is not receiving enough power. If the reader is not receiving ample amount of power from the USB port, it may not function properly.
SOLUTION 4 - Change the drive letters
NOTE: The SDDR-89, SDDR-189, SDDR-289 reader should show 4 drive letters underMy Computer.

The previous version of the smartcard driver for the old SCM SCR331-DI Smart Card reader cannot co-exist with the new version. The old version must be deleted before the new version can be installed. Refer to the smartcard manual for installation instructions to install the smartcard driver. Card reader driver for XP,Vista,Win7,Win8,Win8.1,Win10 10.0.370.188 2018/03/13 17 MB USB card reader driver for Win98/2K V1/06/16 1 MB USB smart card (CCID.

Saxa Card Reader Driver

SOLUTION 2- Verify the reader's status under Device Manager. STEP 1 - Connect the reader to the PC NOTE: It is recommended that you plug your card reader to the back USB port on your PC to ensure that there is enough power from the USB port for the card reader to be detected properly. STEP 2 - Check under Device Manager 1. Right-click My Computer. HAMA 35in1 USB Card Reader Driver 1.24 for 2000/XP 1,896 downloads. Card Readers HAMA. Windows XP, Windows 2K. Apr 30th 2013, 12:38 GMT.