. Live-streaming app = Windows = UVC4K for Windows: RICOH THETA Z1 / RICOH THETA V. Live-streaming library = Linux = Libuvc for RICOH THETA: RICOH THETA Z1 / RICOH THETA V.
This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.
Original product version: Windows 10, version 1703
Original KB number: 4021854
When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.
4 Find your Sony Visual Communication Camera device in the list and press double click on the image device. Click Reinstall driver button. 5 Choose Install from the specific location and click on the Browse button. The 'Select USB Connected Printer' dialog will appear. Select the printer and click 'Next'. Disconnect the USB cable, turn off the printer, and click 'Next'. File copying will commence. When the 'Auto-detect USB Port' dialog appears, connect the USB cable and turn on the printer. The device will be detected. Wait for 1 minute and then reconnect the USB cable. The driver should automatically load Check for the USB drive in Windows Explorer Note Connecting your USB external hard drive into a non-powered USB hub can cause a lack of enough power to operate the external drive. Instead, plug it directly into your computer.
This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.
This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.
To fix this issue, use one of the following methods.
To resolve this issue, install update 4022716.
If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.
If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.
See the device manufacturer's user guide for specific instructions about how to install the driver.
If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:
- Install the device-specific driver (see Method 2).
- Open Device Manager.
- Right-click (or tap and hold) the name of the device, and then select Uninstall.
- Restart the computer.
Ricoh Usb Devices Driver Download For Windows 10 Windows 7
When it restarts, Windows will try to reinstall the device by using the device-specific driver.