Radioshack Driver Download For Windows 10


From The RadioReference Wiki

  1. Radioshack Driver Download For Windows 10 32-bit
  2. Radioshack Driver Download For Windows 10 Laptop
  3. Radioshack Driver Download For Windows 10 64-bit
  4. Radioshack Drivers

There's no Windows 10 driver for that webcam. Gigaware was a Radio Shack house brand, and Radio Shack went bankrupt several years ago. I'm using it on my Windows 10 machine and it works fine. The Windows driver auto installed. I listed it as a Vimcro USB 2.0 PC Camera, so that must have been the original mfg that made it for Radio Shack. Radios, Headphones, TV Antennas, Cables & Adapters, DIY Tools & Parts, Electronics Maker Kits. 450+ RadioShack locations across America and more on the way! Download the most up to date drivers from the manufacturer or distributor and install. Radio shack usb serial driver windows 8. USB scanner/PC interface cable. Viewing If using a USB port adapter, download and install the device driver.

Which software should I use with my scanner?

The following chart is an up to date version of all RS model numbers and the BuTel package that supports it. Note that in some cases, GRE and Whistler had equivalent models, and these are also cross referenced here. Also note that before RS withdrew from the scanner market, they reissued some of their scanners with new model numbers.

Old RS ModelNew RS ModelGRE ModelWhistler ModelBuTel Package

Which software should I select for my Whistler scanner?

For Whistler WS1040 and WS1065 select 'Radioshack PRO-652 Digital Mobile Scanner' in the dropdown menu.

For Whistler WS1010 and WS1025 select 'Radioshack PRO-404' in the dropdown menu.

Radioshack Driver Download for Windows 10


Radioshack Driver Download For Windows 10 32-bit

The software is Windows Vista/7/8/10 compatible (both 32 and 64 bit versions). MAC OS is not supported.

Installation and Use

See this PDF document tutorial which walks the user through the download, installation, and initial programming process.

Scanner Master also has a helpful page with information on installing and using the Radio Shack Programming Software

ARC500 software User Guide


USB Cable Driver Installation

Radioshack Driver Download For Windows 10

This driver works for most Whistler/Radioshack/GRE cables:

See this PDF document which walks the user through the driver installation for the cable

You can also install the driver from the Radioshack Software. Start the Radioshack software selection panel and then press the yellow 'Install USB Driver'.

Registering Your Software

After purchasing your software, you should receive your license keys via email at the address you registered with. Follow these steps to register your software.

  • Click START > PROGRAMS > SCANNER SOFTWARE > [Your Scanner Model]. This will start the software.
  • Confirm the demo message and then choose the menu item HELP > REGISTER.
  • Enter both keys ( Key1 and Key2) you received via email and click OK.
  • The keys are case sensitive and must be entered with the dashes. You must type in the keys, do not use copy/paste.
  • Close the software and then restart by following the first step in this list.
  • Your software should now be registered

Please note that the keys are case sensitive and must be entered with the dashes.

Common Questions and Issues

Radioshack driversRadioshack Driver Download For Windows 10
  • Help my key does not work?

All software license keys sold at are tested and verified and work. Most common errors are:

  • Entering key in incorrect software. Each different software requires a different key.
  • ARC500 key sold here is for ARC500BASIC and will not work in ARC500PRO. License keys for ARC500PRO can be purchased at
  • The license key is case sensitive and must be entered exactly as shown with the dashes
  • I am receiving a 'Nothing Enabled Error' after programming my radio

If you imported info into ARC500 and/or uploaded programming to your scanner and you receive the message 'Nothing Enabled' on your radio, you need to assign the frequencies or talkgroups to a 'scanlist'. This can be done easily in the software by going to the scanlist column next to the alpha tag column, in either Coventional or Talkgroup under Scannable Objects, and typing in the scanlist number. When each frequency and/or talkgroup has been assigned a scanlist you can then proceed with uploading the information to the scanner.

  • No data is transferred to my scanner.

First make sure you plugged the USB cable in the PC/IF jack and not the headphone jack. Also verify that the led's on the USB cable are flashing during the data transfer.If they are not flashing you selected the incorrect usb/com port and/or the driver is not installed correctly. Re-install the USB driver. Also try a different USB port.

  • I am receiving a 'Init not ok. Can't read user data' message when trying to import data from the database

This message usually indicates that a firewall is blocking the software to access the internet. Add the ARC software to the safelist of your firewall software.You may also see this message on satellite internet connections due to the latency on those networks. The webimport may not work on satellite internet, use dialup or cable/DSL instead. 'Hughesnet' users must disable the Turbopage option.

  • I lost my software registration.

If you purchased the software license using this website then simply logon to your Radioreference account at and then locate the Licenses section. This shows all software license details that were purchased. You can also use this link:


Radioshack Driver Download For Windows 10 Laptop


If you need support via email, please contact the Radio Shack Scanner Programming Support Team at:

Radioshack Driver Download For Windows 10 64-bit

Addititional information is available at 800SCANNER resources

Radioshack Drivers

Retrieved from ''