This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.
For certain Universal Serial Bus (USB) devices, such as devices that are accessed by only a single application, you can install WinUSB (Winusb.sys) in the device's kernel-mode stack as the USB device's function driver instead of implementing a driver. This topic contains these sections: Automatic installation of WinUSB without an INF file. All current software, firmware, and drivers for the Surface Pro 3; including optional WinTab drivers. Links to drivers for other Surface devices are in the Details section below. Updates can be found by searching your model name at or though the mydlink mobile applications for mydlink registered devices. Products purchased in the US that have reached END-OF-SUPPORT (EOS) or cannot be found using Search on this site ( support.dlink.com ) may have been moved to our Legacy Products site ( legacy.
Original product version: Windows 10, version 1703
Original KB number: 4021854
When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.
This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.
This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.
To fix this issue, use one of the following methods.
To resolve this issue, install update 4022716.
Usb Driver Device Manager
If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.
Orion USB Devices Driver Download
If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.
See the device manufacturer's user guide for specific instructions about how to install the driver.
Download Usb Device To Computer
If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:
- Install the device-specific driver (see Method 2).
- Open Device Manager.
- Right-click (or tap and hold) the name of the device, and then select Uninstall.
- Restart the computer.
When it restarts, Windows will try to reinstall the device by using the device-specific driver.