Drivers Sma Solar USB Devices

  

SMA Download - Documentations and Documents. The info portal for all SMA plant operators allows you to view and monitor data, access documents and receive status updates. I just got the SMA Sunnyboy 5.0-1av40 fitted at my house but the wifi connection wasnt set up perfectly i guess. I can see the solar energy produced by the device but the box that shows the energy consumption has no reading, Neither does the energy feed-in management section. (this is when i log in through the i.p address link). The purpose of this blog entry is to keep you informed about the latest updates and new publications for SMA devices released by the technical documentation team. This information will be made available regulary. This means that you will always be kept up to date and will never miss any changes or anything new that is published. MSA Sunny WebBox provided is provided by SMA to provide a human interface to current operation and also to provide a portal for remote system monitoring. This driver can be configured to read data from one or more Webbox’s. The Webbox monitors and collates information from attached SMA rectifiers, weather stations and other devices.

If no automatic update is set for the inverter in the communication product (e.g. SMA Data Manager, Cluster Controller, Sunny Portal) or via the user interface of the inverter, you have the option of carrying out a manual firmware update.

UsbDrivers Sma Solar USB Devices

Depending on the battery used, the firmware update of the inverter also updates the battery.

You have the following options to update the firmware:

  • Update the firmware with the existing update file via the user interface of the inverter.

  • Update the firmware with the existing update file via USB flash drive.

  • Search and install the firmware via the user interface of the inverter.

Faulty firmware update due to disconnecting the inverter from the utility grid or when the battery is disconnected or discharged.

The inverter must be connected to the utility grid and the battery must be switched on during the firmware update. The state of charge must be at least 5%. The battery-backup and secure power supply operation must be disabled. This ensures a proper firmware update.

  1. Ensure that the battery is switched on and the state of charge is above 5%.
  2. Do not disconnect the inverter from the utility grid during the firmware update.
  3. Do not enable secure power supply operation during the firmware update.
  4. Do not use the black-start button during the firmware update.

Update the firmware with the existing update file via the user interface of the inverter.

Requirements:

  • An update file with the desired inverter firmware must be available. The update file is, for example, available for download on the product page of the inverter at www.SMA-Solar.com. To download the update file, it is necessary to enter the serial number of the inverter.

Procedure:

  1. Open the user interface ( > Establishing a connection to the user interface).
  2. Log into the user interface as an Installer( > Logging In and Out of the User Interface).
  3. Select the menu Device Configuration.
  4. In the inverter row, click on the gear icon and select Update firmware.
  5. Select [Browse] and select the update file for the inverter.
  6. Select Update firmware.
  7. Follow the instructions in the dialog.

Update the firmware with the existing update file via USB flash drive.

Requirements:

  • A USB flash drive with maximum 32 GB and file system FAT32 must be available.

Procedure:

  1. Create an 'UPDATE' folder on the USB stick.
  2. Save the update file with the required firmware in the 'UPDATE' folder on the USB flash drive. The update file is, for example, available for download on the product page of the inverter at www.SMA-Solar.com. Ensure that only the update file to which the inverter is to be updated must be stored on the USB flash drive.
  3. Danger to life due to high voltages

    1. Disconnect the inverter from any voltage sources and open the enclosure lid of the Connection Unit (see the inverter installation manual).
  4. Insert the USB flash drive in the USB port on the communication assembly.
  5. Commission the inverter ( > Commissioning the Inverter).
  6. During start-up phase of the inverter, the desired firmware is being installed.
  7. Danger to life due to high voltages

    1. Disconnect the inverter from any voltage sources and open the enclosure lid of the Connection Unit (see the inverter installation manual).
  8. Pull the USB flash drive out of the USB port.
  9. Commission the inverter ( > Commissioning the Inverter).
  10. Call up the user interface of the inverter and check the events to see whether a firmware update has been successfully completed.
  11. If the firmware update has not been successfully completed, perform the firmware update again.

Search and install the firmware via the user interface of the inverter.

Requirements:

Solar
  • The inverter must be connected to the Internet.

Drivers Sma Solar USB DevicesDrivers Sma Solar USB devices

Drivers Sma Solar Usb Devices Adapter

Procedure:

Drivers Sma Solar Usb Devices Dongle

  1. Open the user interface ( > Establishing a connection to the user interface).
  2. Log into the user interface as an Installer( > Logging In and Out of the User Interface).
  3. Click on [Edit parameters].
  4. Go to Device > Update.
  5. Select the parameter Check for update and install it and set it to Execute.
  6. Click on [Save all].

Drivers Sma Solar Usb Devices Type C

  • The firmware is updated in the background.