Drivers Silicon Chip Port Devices

  

Info:

Model: Silicon Labs CDC Serial Port Drivers
  1. Advanced Driver Options AN107 Application Note AN107 Version 2.53 Clearance No.: FTDI# 63 4 Modification of INF for Non-Default VID and PID Values In order to use FTDI drivers with devices that are identified by a VID and PID combination other than FTDI's VID and the device default PID, the driver INF files must be modified to match the.
  2. Connect the ESP32 board to the PC using the USB cable. If device driver does not install automatically, identify USB to serial converter chip on your ESP32 board (or external converter dongle), search for drivers in internet and install them. Below are the links to drivers for ESP32 boards produced by Espressif.
  3. Scroll down to the LPT/ COM port then double click Prolific USB to Serial Comm Port; Click Driver in the Windows Properties section; The driver must be numbered as '2.0.2.8' and dates accordingly If the driver was not installed, remove the Serial adapter then run 'PL2303DriverInstaller.exe' again.

DOWNLOAD DRIVERS, SILICON LABS CP210X USB TO UART BRIDGE - Saying that, I goobered an upgrade and now cannot access via console port. Download Silicon Labs CP210x chipset in most used version automatically. Try to set a system restore point before installing a device driver. I'm looking for anyone who might have written an Arduino driver for. This driver is for the CB-FTDI USB to Serial cable CSI Part# 17394 - Black Cable.Support is for Windows XP/Vista/ 32 & 64 bit. FTDI Chip Schede dati. Preferred serial driver chip, Maxim, Exar or NI. Chipi-X10, USB2.0 to DB9 RS-232 full. The FTDI Chipi-X10 is the latest cost effective version of FTDI's USB to RS232 converter cable range.

Vendor: Silicon Laboratories Inc
Version: 6.1.7601.17518
Operating system:Drivers Silicon Chip Port Devices Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10

Drivers Silicon Chip Port Devices Gigabit


Bits: 32-bit (x86), 64-bit (x64)
Driver Date: 2016-03-29
Size: 0.49 mb

Driver description

Download driver Silicon Labs CDC Serial Port Drivers version 6.1.7601.17518 for Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 32-bit (x86), 64-bit (x64).

Screenshot of files

File Name

Silicon_CDC_Serial_port_6.1.7601.17518.zip - (0.49 mb) v.6.1.7601.17518


Please, enter the answer to the following question
Chip

CP2102 is a USB to UART IC from Silicon Labs. It is my favourite converter IC and I have been using USB to RS232 module and USB to TLL modules based on CP2102 for couple of years without any issues. CP2102 is a cheaper alternative to the costlier ftdi IC (ft232) but cp2102 is a bit difficult to solder as it comes in QFN-28 package and is very small (just 5mmx5mm) in size. The main advantage of CP2102 is that no extra external components are required.

CP2102 IC is used in lot of Arduino UNO Clones, arduino Nano, Node MUC and even in ESP32 Development boards. In this tutorial I will provide you with step by step process to install CP2102 USB Driver in windows.

You can download CP2102 driver from below

  • CP2102 USB Driver for Windows XP, 7, 8, 8.1 & Windows 10


Step by Step Installation of CP2102 Drivers

Initially connect your hardware having CP2102 USB to Serial IC to your PC. In the device manager it will show “CP2102 USB to UART Bridge Controller” (as shown in below figure) which means that your PC has detected the drivers but please note the “!” sign which indicated cp2102 drivers have not been installed.


Drivers Silicon Chip Port Devices For Sale

Now extract the “CP210x_Windows_Drivers” in a folder and in that you will find applications named “CP210xVCPInstaller_x64” & “CP210xVCPInstaller_x86”. If your system is 64 bit then run “CP210xVCPInstaller_x64.exe” application and if it is 32 bit then run “CP210xVCPInstaller_x86” application.


Once you run your application it will show you the welcome screen click “Next” on the screen. Then the license Agreement screen is shown select “I agree” and then on “Next”.


Drivers


Just relax now the CP2102 drivers will start installing…..and within few seconds completed screen will be displayed.



Once installed it will show driver successfully installed. Now go again back to device manager and there you will see that the driver has been successfully been installed and a com port has been allotted. In below image you can see that “com4” has been allotted for cp2102 IC in my laptop.


Drivers for the CP2102 have now been installed successfully. I have tested this drivers and installation process in Windows XP, windows 7. Will test is soon on Windows 8 & windows 10.

You can see in above image that Port Number 4 has been allocated to this IC. If you want you can even change the virtual com port number from Device Manager.

For latest CP2102 drivers and for drivers for MAC, Linux and for Android OS please check this link.

Please enable JavaScript to view the comments powered by Disqus.