Download Responsive Innovations USB Devices Driver

  

The cases of USB devices not working in Windows 10 is more commonly reported after a Windows update. However, this problem can occur at any other time and you will find below the steps to fix the problem of USB Device Not Working in Windows 10.

Disclaimer This page is not a piece of advice to remove Windows Driver Package - Dynastream Innovations (libusb0) LibUsbDevices ( 1.12.2) by Dynastream Innovations from your PC, nor are we saying that Windows Driver Package - Dynastream Innovations (libusb0) LibUsbDevices ( 1.12.2) by Dynastream Innovations is not a good software application. Find the DJI COM controller (should be in the list of devices; make sure your VU is plugged into a USB port and your quad being powered with a battery) once you find the controller, right click on it - Update Driver Software - point it to the files you extracted. Make sure you use the appropriate driver. If using a win 32 bit system use. Tech support scams are an industry-wide issue where scammers trick you into paying for unnecessary technical support services. You can help protect yourself from scammers by verifying that the contact is a Microsoft Agent or Microsoft Employee and that the phone number is an official Microsoft global customer service number.

USB Device Not Working in Windows 10

The problem of USB Device not working in Windows 10 might be related to various issues, ranging from outdated device drivers and power management settings to USB devices not loading or inconsistently loading on a Windows computer.

Before going ahead with the steps to fix USB Device Not working issue in Windows 10, it is a good idea to rule out the possibility of the USB device itself being faulty.

Remove the USB device from your computer and plug it into another computer and see if it works. If it works, the device is OK and you can follow the steps below to fix the problem on your computer.

1. Power Flush Computer

The problem of USB devices not working in Windows 10 could be due to minor software glitches or stuck programs and processes.

1. Power OFF your computer by pressing the Power button.

2. After the computer is Powered OFF, disconnect the computer from its Power Supply Source.

3. Wait for 5 minutes and Restart the computer

2. Uninstall Faulty Device Driver

1. Right-click on Start button and then click on Device Manager.

2. On the Device Manager screen, expand the entry for Universal Serial Bus Controllers > right-click on the Unknown Device and click on Uninstall Device option.

Download Responsive Innovations Usb Devices Driver Updater

3. On the confirmation pop-up, click on OK to confirm.

4. Repeat the above steps for other affected devices (if any) and Restart your computer.

Once your computer restarts, Windows 10 will automatically load the right drivers as required.

3. Change Power Management Setting For USB Root Hub

In order to save power, Windows 10 has a tendency to turn-off power supply for unused USB ports and this can cause the problem of USB device not working in Windows 10.

1. Right-Click on Start button and click on Device Manager option.

2. On the device Manager Screen, right-click on USB Root Hub and click on Properties.

3. On the Properties screen, click on Power Management tab and uncheck the option for “Allow the computer to turn off this device to save power” and click on OK.

4. Repeat the above steps for other USB Root Hubs (If any) and Restart your computer.

4. Disable Fast Startup

While the Fast Startup feature in Windows 10 helps the computer to start in no time (YES! faster than Mac), this feature can sometimes end up not loading USB devices or loading them inconsistently (ON and OFF).

If you are noticing that sometimes USB devices work and sometimes do not, disabling fast startup can fix the problem on your computer

1. Open Settings > click on System icon.

2. On the System screen, click on Power & Sleep in the left pane. In the right-pane, scroll down and on Additional Power Settings Link.

2. On the Power Options Screen, click on Choose What the Power Buttons Do link.

3. On the next screen, scroll down to “Shutdown Settings” and uncheck Turn on fast startup option.

4. Click on Save Changes button.

Now, restart your computer and see if the USB device is now working on your computer.

5. Check For Updates

See if an Update is available for your computer. If an update is available, Windows will also install the latest available drivers for USB Ports on your computer.

1. Click on the Start button > Settings Icon > Updates & Security.

2. On the Update and Security screen, click on Windows Update in the left pane and then click on Check For Updates button.

3. Allow Windows to check for available updates and install them onto your computer

In case updates are available, the latest available device drivers will also be installed on your computer.

Download Responsive Innovations USB Devices Driver

6. Disable USB Selective Suspend Setting

Download Responsive Innovations USB Devices Driver

By default, Windows computer is set to conserve power by suspending power supply to external USB devices, whenever they are inactive.

However, this power saving setting can sometimes cause problems like Error Code 43 and USB Device Not Recognized Error in Windows 10.

1. Go to Settings > System > Power & Sleep, scroll down and click on Additional Power Settings Link.

2. On Power Options screen, click on Change Plan Settings link located next to the current Power Plan.

5. Next, click on Change Advanced Power Settings link.

6. On the next screen, click on USB Settings > USB selective suspend setting and select disabled option for “Plugged In” and also for “On Battery” in case you are using a Laptop.

7. Click on OK to save above settings.

-->

This topic describes the device-specific registry entries.

Find device information after it enumerates on Windows

View the device interface GUID, Hardware Id, and device class information about your device

  1. Find this registry key and note the DeviceInstance value:

    HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlDeviceClasses

  2. Find the device instance registry key and get the device interface GUID:

    HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumUSB<hardware id><instance id>Device Parameters

  3. Under the device instance key, note the device class, subclass, and protocol codes:

    HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumUSB

Registry settings for configuring USB driver stack behavior

The registry entries described in this topic are found under this key:

In the vvvvpppprrrrr key,

  • vvvv is a 4-digit hexadecimal number that identifies the vendor
  • pppp is a 4-digit hexadecimal number that identifies the product
  • rrrr is a 4-digit hexadecimal number that contains the revision number of the device.

The vendor ID, product ID, and revision number values are obtained from the USB device descriptor.The following table describes the possible registry entries for the vvvvpppprrrrr key. The USB driver stack considers these entries as read-only values.

Registry entryDescriptionPossible values

osvc

REG_BINARY

Supported on Windows XP and later versions.

Indicates whether the operating system queried the device for Microsoft-Defined USB Descriptors. If the previously-attempted OS descriptor query was successful, the value contains the vendor code from the OS string descriptor.

  • 0x0000: The device did not provide a valid response to the Microsoft OS string descriptor request.

  • 0x01xx: The device provided a valid response to the Microsoft OS string descriptor request, where xx is the bVendorCode contained in the response.

IgnoreHWSerNum

REG_BINARY

Supported on Windows Vista and later versions.

Indicates whether the USB driver stack must ignore the serial number of the device.

  • 0x00: The setting is disabled.

  • 0x01: Forces the USB driver stack to ignore the serial number of the device. Therefore, the device instance is tied to the port to which the device is attached.

ResetOnResume

REG_BINARY

Supported on Windows Vista and later versions.

Indicates whether the USB driver stack must reset the device when the port resumes from a sleep cycle.

  • 0x0000: The setting is disabled.

  • 0x0001: Forces the USB driver stack to reset a device on port resume.

Related topics